Windows 10: M.2 SSD recognized in Device Manager but not in BIOS

Hello, I'm having issues migrating my current boot drive SATA SSD to my new NVMe SSD.Motherboard: GIGABYTE Z690 X GAMING DDR4NVMe SSD: SAMSUNG 990 EVOSATA SSD: LS600 120G Current Boot DriveI have already migrated my current boot drive to the newly installed SSD using Samsung Magician. I can read and write on the new SSD, and it is also listed in the Device Manager and Hard Drive Sentinel.However, when I attempt to change the boot order in the BIOS, it does not detect the newly installed SSD at all.I also tried disconnecting the current boot drive in hopes that it would try booting from the

:)

 

My m.2 ssd is recognized in bios, but not as a boot device

Thank you very much for reaching out! As an Independent Advisor and fellow Microsoft user, I'm more than happy to assist you.

Here are some steps you can take to troubleshoot and potentially resolve this issue:

1. Check BIOS Settings

Ensure that your BIOS settings are correctly configured to recognize the M.2 SSD as a boot device:

• Enable CSM (Compatibility Support Module): Sometimes, enabling CSM can help the BIOS recognize the SSD as a boot device. You can find this option under the Boot tab in the BIOS settings.
  
• Set Boot Priority: Make sure the M.2 SSD is set as the first boot device in the boot priority list.
  

2. Update BIOS

Updating your motherboard's BIOS to the latest version can resolve compatibility issues with new hardware:

• Visit the ASUS official website to download the latest BIOS update for your ROG Strix B650 Wi-Fi motherboard.
  

3. Reinstall the SSD

Ensure that the M.2 SSD is properly installed:

• Remove the SSD and reinsert it firmly into the M.2 slot. Make sure it is securely fastened with the screw.
  

4. Initialize the SSD

If the SSD is new, it might need to be initialized:

• Boot into Windows using another drive, open Disk Management, and initialize the SSD as either MBR or GPT.
  

5. Check for Drive Mode Compatibility

Ensure that the M.2 slot you are using supports the type of SSD you have (SATA vs. NVMe):

• Some M.2 slots only support either SATA or NVMe, not both. Refer to your motherboard manual to confirm compatibility.
  

6. Repair Boot Configuration

If the SSD has Windows installed but is not recognized as a boot device, you might need to repair the boot configuration:

• Boot from a Windows installation USB, go to the command prompt, and use the following commands:
  
  
  This can help rebuild the boot configuration data.
  

7. Check for Hardware Issues

If none of the above steps work, there might be a hardware issue with the SSD or the motherboard:

• Test the SSD in another system to see if it is recognized as a boot device.
  
• If the SSD works in another system, the issue might be with the motherboard. Consider contacting ASUS support for further assistance.
  

Please feel free to reach out if you require any additional assistance. I'm here to help!

 

Windows Installer not recognizing M.2 SSD but BIOS does

I want to install Windows on a 500GB M.2 SSD that I have on my ASUS TUF F15 laptop but the Windows Installer doesn't recognize the SSD when BIOS does. I have tried literally every solution i could find and nothing has worked so far but I feel like I am close to solving my issue. Any solution that involves accessing Windows is immediately thrown away.

I have tried:

adjusting the SSD position ensuring its secured

tried formatting it in CMD but it doesn't appear on the disk list and is grayed out on the installer

tried using a different M.2 port

tried resetting bios

tried enabling/disabling secure boot

cant find an option to enable/disable the SSD

cant find an option to enable/disable UEFI

boot menu only gives fast boot and delete boot option

tried updating bios

tried disabling fast boot

This happened after i screwed around with intel RAID stuff and it basically killed my SSD. RAID is no longer enabled on the SSD.

The installer also suggests downloading storage drivers, but I highly doubt thats the issue.

My last hope at this point is buying a new SSD and going from there but I'd rather make absolutely sure this is unresolvable before spending money on a new SSD.

 

My m.2 ssd is recognized in bios, but not as a boot device

Hi everyone, I put my western digital m.2 ssd with windows installed into my motherboard, an ASUS rog strix b650 Wi-Fi motherboard, it is showing up in BIOS as storage, but not as a boot device.

I have tried all three m.2 slots, but it has not worked.

M.2:
WD - Blue SN580 1TB Internal SSD PCIe Gen 4 x4 NVMe

I bought it from Best Buy

Thanks, Stephanie