Windows 10: In my Hp victus laptop a problem occured in webcam camera all the sites and chrome are...

In my Hp victus laptop a problem occured in webcam camera all the sites and chrome are showing it has two camera devices and in pc it shows only one camera that is HP WIde vision camera .In device manager only one camera device is shown and one driver is installed but when performing webcam test it detect two camera1.Hp Enhanced Camera2.Hp wide vision hd cameraI have to give test on hiring platform for placement process in company I have to give test on {HIRE PRo}platform but it does not proceed from the compatiblity page where you have to select only one camera to resume test .I have to un

:)

 

Reusing old laptop webcam as USB camera

I took the webcam from an old Compaq 620 laptop and after a few wire connections I can connect it to the USB port

For a few seconds it is detected as HP Webcam 2.0 in device manager under Cameras (which also shows the built in Webcam for this laptop), but then after a while the Device Manager window refreshes and the webcam from the old laptop goes under the node Imaging Devices and it is listed as HP Universal Camera Driver. The old laptop is broken so I cannot test it again, but if I remember correctly it's webcam used to shown as HP Webcam 2.0 as well, in device manager

However, the problem is that the external USB camera is not detected by any application. I have tested using online webcan test sites (eg, Webcam Test) and using Skype's camera settings window (it shows a preview of the selected webcam), but in both cases I can only see the built in webcam on the detected cameras list

Since the USB camera initially shows up as HP Webcam 2.0 for a few seconds initially (when auto installing drivers for the first time), if I manage to open skype's audio settings window within that period, the USB webcam does show up in the detected cameras list, but by them it will have become detected as HP Universal Camera driver and disappears from the skype camera list.

I have seen blogs and videos online of other people using their old laptop webcams as external USB webcams, so this should be possible for at least some models. Since it is consistently detected as a USB device I am supposing the connections are correct as well. I do have 4 diodes connected in series to the USB +5V line before it goes to the camera, and each diode drops about 0.5 V, so the camera is only seeing about 3 V. Since USB detection works up to the driver auto-installation point I am assuming power isn't an issue.

Is there anyway to test whether this webcam works as a USB webcam or not? Could this just be an issue of finding the correct drivers? Once this gets detected as HP Universal Camera Driver in the device manager, going to driver upgrade and auto-searching online only says the best driver is already installed. I have also tried searching for compaq 620 webcam windows 10 drivers but they don't seem to be available. Is there some kind of generic driver that should always work with any camera? Could this be a windows 10 issue? Would this work on linux? I'm not sure how to test webcams on Linux though.

EDIT:

I found possible drivers here:

HP Compaq 620 Drivers Download for Windows 10, 8.1, 7, Vista, XP

I could not find camera drivers for Windows 10 in HP's official page. This new linked page claims the camera driver is for Windows 10, and says the device name is HP Webcam [2 MP Fixed], which is what I expect, downloading the driver downloads files whose name implies camera device is manufactured by realtek. While using the webcam in my old laptop before I never recall Realtek being associated with anything to do with the webcam (this name was associated with the network card only) and looking at the PCB of the webcam itself doesn't indicate it is related to realtek in any way. Would it be risky to try and install this driver anyway? The new laptop is also an HP with the webcam being detected as Asus. I just don't want the drivers for the USB webcam to interfere with the built in one.

EDIT 2:

I installed drivers from the link above. The camera now shows up under Imaging Devices (not sure why it does not show up under Camera like the built in webcam) node as HP Webcam 2.0. It is also detected by applications such as skype (shows up in camera setup window's detected cameras list) but if I select the webcam skype just hangs up and I need to force close it from the task manager. If I disconnect the webcam the built-in webcam shows up and skype runs normally. The driver download link above comes with a webcam testing utility called "RsCap.exe". This utility also shows the usb webcam in it's list, but hangs if I select and try to preview the webcam. If I disconnect the webcam the built in webcam previews normally and is pretty fast.

I booted the computer using a USB live install of puppy linux and used the built in USB scanning tool to scan for everything connected to USB. This is what it shows regarding the usb webcam and the built in webcam.

Built in webcam:

Usb webcam:

Is there anyway to use this usb webcam?

 

Problem in accessing Webcam on Windows 10 HP Probook 4430s laptop

Hi Tony,

• Did you try installing the webcam drivers from HP support site as suggested by Yeshwanth?

You may try the suggestions provided from this HP support site and check if it helps.

HP PCs - Webcam Troubleshooting (Windows 10, 8)

http://support.hp.com/us-en/document/c03430151/

You may also refer this Microsoft Blog to fix the webcam issue on Windows 10:

How to fix Windows 10 issues with cameras when the Windows Camera app fails to launch

https://blogs.technet.microsoft.com...-when-the-windows-camera-app-fails-to-launch/

Regards,

 

Webcam Problems?


Step One - go back to your computer mfgr's support site, register, and download the latest drivers and chipset software. When I visited Dell I found 9 as of yet uninstalled updates for my two yr old laptop!

Visit Adobe and check which version of Flash Player you're running, and D/L the latest version.

You should be good to go. Your webcam's controlled by your web browser but also authorized and either blocked or allowed by the identity software of sites you visit. Here's Coursera's instructions for fixing identity verification problems:

If you're having trouble with your webcam:

1. Check that your webcam is enabled and connected to your computer. Try a third-party tool like http://www.testwebcam.com.
2. Make sure you have the latest version of Adobe Flash Player.
3. Check that you have the latest version of your browser or try using a different browser.
4. If you’re using an external webcam, verify that you've installed your webcam's most recent driver software from the manufacturer.
5. Try refreshing the page.
6. Try switching to HTML5 webcam access by clicking the Switch to HTML5 link in the lower right hand corner of the webcam window.

If you see a dialogue box entitled Adobe Flash Player Settings:

1. Click Close
2. Click Allow

If the webcam area is blank:

1. Right click on webcam area
2. Select Settings
3. In the Settings menu, click the webcam icon and change the camera option to match the webcam you are using

Note to Google Chrome users: If the webcam area on the page is blank, and you can't access the Flash settings menu, click the small camera icon to the right of your browser bar and select "Always allow Coursera - Free Online Courses From Top Universities to access your camera and microphone."
To allow Flash access manually (in Google Chrome):

1. Type chrome://plugins into your browser bar
2. Find the Adobe Flash Player plugin
3. Check Always allowed
4. Quit Chrome and restart